Aaron's Lab Batch Mixer is furnished in three sizes with a manual hand tilt over the front mixing blade. Mixer blades are interchangeable for studying results provided by different blade configurations. These units are ideal for research and development, testing new raw materials or scaling up production size batches. (Failure to acheive your optimal mixing results is not necessarily a test that failed)
| |
| Model
LNG .25 (.25 Gallon) |
|
| Total Capacity |
.5 Gallon / 2 Liters |
| Mixing Capacity |
.25 Gallon / 1 Liter |
| Drive |
.75 HP (1KW) Direct Drive Gearmotor |
| Blade Speed |
0-70 RPM (Front) / 0-40 RPM (Rear) |
| Discharge |
Manual tilt over front bearing journal |
| Jacket |
Suitable for steam, water or hot oil operation |
| Seals |
Standard Packing Glands |
| Controls |
1PH / 115 volts / AC controller with run / jog, start / stop,
forward / reverse and variable speed control adjustment, 90
volt DC motor. |
| Chamber |
Suitable for full vacuum operation |
| Blades |
Available in Sigma or Dispersion style |
| |
| Model
LNG 1 (One Gallon) |
|
| Total Capacity |
2.3 Gallons / 8.7 Liters |
| Mixing Capacity |
1 Gallon / 3.7 Liters |
| Drive |
2 HP (2.7 KW) Direct Drive Gearmotor |
| Blade Speed |
0-70 RPM (Front) / 0-40 RPM (Rear) |
| Discharge |
Manual tilt over front bearing journal |
| Jacket |
Suitable for steam, water or hot oil operation |
| Seals |
Standard Packing Glands |
| Controls |
1PH / 115-230 volts / AC controller with run / jog, start
/ stop, forward / reverse and variable speed control adjustment,
180 volt DC motor. |
| Chamber |
Suitable for full vacuum operation |
| Blades |
Available in Sigma or Dispersion style |
| |
| Model
LNG 2 (Two Gallon) |
|
| Total Capacity |
3.75 Gallons / 14 Liters |
| Mixing Capacity |
2 Gallons / 7.5 Liters |
| Drive |
2 HP (2.7 KW) Direct Drive Gearmotor |
| Blade Speed |
0-70 RPM (Front) / 0-40 RPM (Rear) |
| Discharge |
Manual tilt over front bearing journal |
| Jacket |
Suitable for steam, water or hot oil operation |
| Seals |
Standard Packing Glands |
| Controls |
1PH / 115-230 volts / AC controller with run / jog, start
/ stop, forward / reverse and variable speed control adjustment,
180 volt DC motor. |
| Chamber |
Suitable for full vacuum operation |
| Blades |
Available in Sigma or Dispersion style |
